Area Converter
Convert between square feet, square metres, acres, hectares, square miles, and more — instantly.
Area Converter
Formulas:
Convert to square metres first, then to the target unit: result = value × (m² per from-unit) ÷ (m² per to-unit)
1 acre = 43,560 ft² = 4,046.8564224 m² exactly | 1 hectare = 10,000 m² | 1 ft² = 0.09290304 m² exactly | 1 mi² = 2.589988110336 km² exactly
What Does an Area Converter Do?
An area converter changes a surface measurement from one unit to another: square feet to square metres, acres to hectares, square miles to square kilometres. It answers the questions that come up whenever land, floor space, and property are measured in different systems — a house listed in square feet for a buyer who thinks in square metres, a farm of 50 acres for a reader who knows hectares, a city park measured in square kilometres for a local who pictures acres. Type a number, pick the units, and the answer appears immediately, worked out from the exact conversion factors.
Area conversion is the conversion people get wrong most often, because the factors are not the familiar length factors. One foot is 0.3048 metres, but one square foot is 0.092903 square metres — the length factor squared. Using the length factor for an area gives an answer that is wrong by a factor of more than three, and the mistake is easy to make because the units sound alike. This converter uses the squared factors throughout, so the answers are right.
How to Use This Converter
Enter the value, choose the unit it is in, and choose the unit you want. The result updates as you type, and the swap button reverses the direction so you can check a conversion both ways. The conversion rate line underneath shows what one of the source unit equals in the target unit — useful when you are converting a whole list of areas, for example a set of room sizes in a floor plan.
The converter covers ten units: square millimetres, square centimetres, square metres, hectares, and square kilometres on the metric side, and square inches, square feet, square yards, acres, and square miles on the imperial side. That covers everything from a phone screen in square centimetres to a county in square miles.
Area Conversion Factors
Every conversion on this page is built on exact definitions. The acre is defined as exactly 43,560 square feet, and the square foot is defined from the foot (exactly 0.3048 metres), which makes the square foot exactly 0.09290304 square metres. The table below gives the factors this converter uses.
- 1 square foot (ft²) = 0.09290304 square metres = 144 square inches (exact)
- 1 square inch (in²) = 6.4516 square centimetres (exact)
- 1 square yard (yd²) = 9 square feet = 0.83612736 square metres (exact)
- 1 acre = 43,560 square feet = 4,046.8564224 square metres = 0.40468564224 hectares (exact)
- 1 square mile (mi²) = 640 acres = 2.589988110336 square kilometres (exact)
- 1 hectare (ha) = 10,000 square metres = 2.47105381 acres
- 1 square kilometre (km²) = 100 hectares = 0.386102159 square miles
- 1 square metre (m²) = 10.7639104 square feet = 1.19599005 square yards
The metric factors are exact because metric units are defined by powers of ten — though note the powers square: 1 square metre is 10,000 square centimetres, not 100, because each side is 100 centimetres and 100 × 100 = 10,000. The imperial factors are exact because they derive from the exact inch and foot. Conversions the other way — square metres to square feet — produce repeating decimals and are shown rounded.
Worked Examples
A house of 2,000 square feet in square metres: 2,000 × 0.09290304 = 185.80608 square metres, usually rounded to about 186 m². That is a typical three-bedroom family home. Going the other way, a 100-square-metre apartment is 100 ÷ 0.09290304 = 1,076.39 square feet. The rough rule of thumb — divide square feet by 10 to get square metres — gives 200 m² for the house, which is about 8% too high; the converter's exact figure is the one to use for flooring orders and estate listings.
A field of 2.5 acres in square metres and hectares: 2.5 × 4,046.8564224 = 10,117.14 square metres, which is 1.011714 hectares (divide by 10,000). A full-size football pitch, about 105 metres by 68 metres, covers 7,140 square metres — about 1.76 acres — so 2.5 acres is roughly one and a half football pitches. Picturing areas in football pitches is a useful sanity check: if a converted area sounds wildly different from the number of pitches you expect, a unit has been mixed up.
A city area of 50 square miles in square kilometres: 50 × 2.589988110336 = 129.499 square kilometres, about 129.5 km². For comparison, Manhattan is about 59 square kilometres (22.8 square miles), so 50 square miles is a little more than twice Manhattan.
Which Unit for Which Job
Square feet and square metres are the units of buildings: floor areas, room sizes, office space, and carpet or tile quantities. In the United States, houses are listed in square feet; in most of the rest of the world, in square metres. Square yards appear in carpet and fabric, because carpet is traditionally sold by the square yard in the US and UK — a 12-foot by 10-foot room is 120 square feet, which is 13.33 square yards.
Acres and hectares are the units of land. The acre is the traditional unit for farms and plots in the United States and the United Kingdom; the hectare is the metric equivalent used almost everywhere else, and increasingly in the UK too. One hectare is about 2.47 acres. Square miles and square kilometres are the units of towns, cities, and regions — nobody describes a garden in square miles or a county in square feet, and choosing the right scale keeps the numbers readable.
Tips for Accurate Conversions
Square the length factor. If you ever convert an area by hand, remember that the factor is the square of the length factor: 1 square foot is 0.3048 × 0.3048 = 0.09290304 square metres. Converting with 0.3048 gives an answer 3.28 times too large. The converter handles this automatically, but the rule is worth knowing for checking answers.
Measure the area in the unit you will buy in. Flooring, paint, and turf are sold by area in the local unit. Convert the room measurements to that unit before working out quantities, so the waste allowance and the price per unit area all use the same numbers.
Use the football-pitch test. A football pitch is about 7,140 square metres or 1.76 acres. A tennis court is about 261 square metres (23.77 m × 10.97 m for doubles). Comparing a converted area with a familiar space catches errors of ten or a hundred times, which are the most common kind.
Round at the end. If a converted area feeds into a cost — flooring at a price per square foot, land at a price per acre — carry the full-precision number forward and round only the final price. Rounding the area first can shift the cost by more than the rounding looks worth.
Common Mistakes to Avoid
The biggest mistake is using a length factor for an area, as described above: 1 foot is 0.3048 metres, but 1 square foot is 0.092903 square metres. The same trap exists for volume (0.3048 cubed). Whenever a conversion involves square or cubic units, the factor must be squared or cubed too.
The second mistake is confusing the acre with the hectare. They are the same kind of unit — a field-sized area — but a hectare is about two and a half times an acre. A 100-hectare farm is 247 acres, not 100 acres. The names sound similar, the sizes are not.
A third error is mixing up square feet and feet square. A "10-foot square" is a square 10 feet on each side, which is 100 square feet — not 10 square feet. Estate listings and room dimensions usually mean square feet; a phrase like "12 feet square" in older listings means a 12-by-12-foot room, or 144 square feet. For lengths, see the length converter; for volumes, the volume converter.
Frequently Asked Questions
How many square feet are in a square metre?
10.7639104 square feet. So 100 square metres is 1,076.39 sq ft, and a 2,000 sq ft house is about 185.81 square metres.
How many square feet are in an acre?
Exactly 43,560 square feet. An acre is also 4,046.8564224 square metres or 0.40468564224 hectares.
How many acres are in a hectare?
2.47105381 acres. A hectare is 10,000 square metres; an acre is 4,046.8564224 square metres, so the hectare is about two and a half times the acre.
How many square metres are in a square foot?
Exactly 0.09290304 square metres. Note that this is the length factor squared (0.3048 x 0.3048), not 0.3048 itself.
How many acres are in a square mile?
Exactly 640 acres. A square mile is also 2.589988110336 square kilometres or 259 hectares (258.9988110336 ha).