Pressure Converter

By Asira Tools Team · Last updated 20 November 2026

Convert between psi, bar, kilopascals, atmospheres, mmHg, and inches of mercury — the units of tires, weather, and diving.

Advertisement

Pressure Converter

220.63 kPa
PSI32 psi
Bar2.21 bar
Kilopascals220.63 kPa
Atmospheres2.18 atm

Standard atmospheric pressure: 1 atm = 101,325 Pa = 101.325 kPa = 1.01325 bar = 14.6959 psi = 760 mmHg = 29.92 inHg.

Formulas:

1 atm = 101,325 Pa = 101.325 kPa = 1.01325 bar = 14.6959 psi = 760 mmHg = 29.92 inHg

psi to kPa: multiply by 6.89476  |  bar to psi: multiply by 14.5038

mmHg to kPa: multiply by 0.133322  |  inHg to hPa: multiply by 33.8639

What Does a Pressure Converter Do?

A pressure converter translates between the units used to measure force per unit area: pounds per square inch (psi), bar, kilopascals (kPa), atmospheres (atm), millimeters of mercury (mmHg), and inches of mercury (inHg). Pressure is one of those quantities where every field uses a different unit — tire gauges read psi in the US and bar or kPa elsewhere, weather reports use hectopascals or inches of mercury, blood pressure is measured in mmHg, and scuba divers think in bar or psi. This converter speaks all of them.

The anchor for all of these units is atmospheric pressure at sea level: 1 atmosphere = 101,325 pascals exactly. Everything else is defined against it or against the pascal, the SI unit of pressure. One pascal is one newton of force spread over one square meter — a very small pressure, which is why everyday measurements use kilopascals (thousands) or bar (hundreds of thousands).

The Conversion Factors

Every factor below is exact or defined to the precision shown. The converter uses the full-precision values, so round trips return the original number.

A useful rule of thumb: 1 bar is very close to 1 atmosphere (1 bar = 0.986923 atm), so for rough purposes they are interchangeable — but the 1.3% difference matters in precise work, so the converter keeps them separate.

How to Use This Converter

Enter the pressure, pick the unit it is in, and pick the unit you want. The headline result is the converted pressure, and the rows underneath show the same pressure in psi, bar, kPa, and atm for quick comparison. The default shows a typical car tire pressure: 32 psi is 220.63 kPa, 2.21 bar, and 2.18 atm.

The results update as you type, so you can check a whole set of pressures quickly — for example, working through a tire placard that lists different pressures for the front and rear axles, or comparing a weather report in hectopascals with an old barometer in inches of mercury.

Tire Pressure: PSI, Bar, and kPa

Tire pressure is the most common everyday pressure conversion. Cars in the US list pressures in psi — typically 30 to 35 psi for a passenger car — while cars in Europe list bar (typically 2.2 to 2.5 bar) and cars in Australia and Canada often list kPa (typically 220 to 250 kPa). The same tire at 32 psi is at 2.21 bar and 220.63 kPa; all three numbers describe the same inflation.

The correct pressure is printed on a placard on the driver's door jamb, not on the tire itself — the number on the tire sidewall is the maximum the tire can hold, not the recommended pressure. Check pressures when the tires are cold, because driving heats the air inside and raises the pressure by roughly 1 psi for every 10 degrees Fahrenheit (about 5.5 degrees Celsius) of temperature rise. A tire correctly inflated at 70°F will read about 3 psi low on a 40°F morning.

Weather: Hectopascals and Inches of Mercury

Weather reports measure atmospheric pressure, and the unit depends on where you live. Most of the world uses hectopascals (hPa), where 1 hPa = 100 Pa, so standard pressure is 1,013.25 hPa. The United States uses inches of mercury, where standard pressure is 29.92 inHg. The two are related by 1 inHg = 33.8639 hPa, so a forecast of 1,020 hPa is 30.12 inHg — high pressure, usually fair weather — and 990 hPa is 29.23 inHg — low pressure, usually unsettled weather.

Barometers were traditionally built with a column of mercury, which is why the units are named after it: the height of the mercury column balanced the weight of the atmosphere above it. At sea level that column is 760 millimeters tall, which is why standard pressure is 760 mmHg. Mercury barometers are now rare, but the unit lives on in weather reporting and in medicine.

Worked Example: A Scuba Dive and a Blood Pressure Reading

A scuba tank is typically filled to 200 bar. In psi, that is 200 × 14.5038 = 2,900.76 psi — which is why American divers say a full tank is "3,000 psi" (a rounded figure for a 207 bar fill, which is 3,002.28 psi). At a depth of 10 meters, the water adds almost exactly 1 bar of pressure, so a diver at 10 meters experiences about 2 atm of absolute pressure: 1 atm from the air plus 1 bar from the water. At 30 meters, it is about 4 atm. This is why dive tables are organized by depth in 10-meter steps — each step adds one atmosphere.

Blood pressure is measured in mmHg: a normal reading is around 120/80 mmHg. In kilopascals that is 16.00/10.67 kPa (120 × 0.133322 = 16.00). The numbers are the pressure of the blood pushing against the artery walls when the heart beats (systolic, the higher number) and when it rests between beats (diastolic, the lower number). Medicine keeps mmHg because the original instruments were mercury columns, and the numbers are familiar to every clinician.

Gauge Pressure vs Absolute Pressure

One subtlety: most pressure gauges measure gauge pressure — the pressure above atmospheric pressure — while physics uses absolute pressure, which includes the atmosphere. A tire gauge reading 32 psi means the air inside the tire is at 32 psi above the outside air, or about 46.70 psi absolute (32 + 14.70). Weather pressure, by contrast, is always absolute. This converter converts the number as given; if you are working with gauge pressures, add or subtract 1 atm (14.6959 psi, 101.325 kPa) to switch between gauge and absolute.

Tips for Pressure Conversions

Memorize 14.5 and 6.9. One bar is about 14.5 psi, and one psi is about 6.9 kPa. With those two numbers you can convert the common cases in your head: 2.5 bar is about 36 psi, and 30 psi is about 207 kPa.

Use hPa = mbar. One hectopascal equals one millibar, exactly. Old weather maps in millibars and new ones in hectopascals are the same numbers, so no conversion is needed at all.

Check the unit before the number. A pressure of "30" could be 30 psi (a car tire), 30 inHg (a high-pressure weather system), or 30 bar (a scuba tank at low pressure). The unit carries more information than the number.

Common Mistakes to Avoid

The biggest mistake is confusing bar and atm. They are close — 1 bar is 0.986923 atm — but in diving and in engineering the 1.3% difference adds up. A 200 bar tank is 197.38 atm, not 200 atm, and a dive computer that mixed them up would miscalculate decompression.

The second mistake is forgetting gauge versus absolute pressure. Adding pressures from two gauges is fine, but adding a gauge pressure to an absolute pressure without the 1 atm offset gives an answer that is wrong by 14.7 psi. Always check which kind of pressure each number is.

The third mistake is using the tire sidewall number instead of the door placard. The sidewall maximum (often 44 or 51 psi) is a safety limit, not a recommendation. Inflating to the maximum makes the ride harsh, wears the center of the tread, and reduces grip.

Advertisement

Frequently Asked Questions

How many psi is 1 bar?

14.5038 psi. One bar is 100,000 pascals, and one psi is 6,894.76 pascals, so 100,000 / 6,894.76 = 14.5038 psi.

What is 32 psi in kPa?

220.63 kPa. Multiply psi by 6.89476: 32 x 6.89476 = 220.63 kPa. That is a typical passenger car tire pressure, equal to 2.21 bar.

What is normal atmospheric pressure?

1 atmosphere = 101,325 Pa = 101.325 kPa = 1,013.25 hPa = 14.6959 psi = 760 mmHg = 29.92 inHg. Weather above about 1,020 hPa is high pressure; below 1,000 hPa is low pressure.

How many psi is 1 atm?

14.6959 psi. One atmosphere is 101,325 pascals, and dividing by 6,894.76 pascals per psi gives 14.6959 psi.

What is the difference between bar and atm?

1 bar is exactly 100,000 Pa, while 1 atm is exactly 101,325 Pa. So 1 bar = 0.986923 atm. They are close but not equal, and the 1.3% difference matters in diving and engineering.