Paint Coverage Calculator

By Asira Tools Team · Last updated 20 November 2026

Find out exactly how much paint a room needs — in gallons and quarts — before you buy, so you neither run short nor overbuy.

Advertisement

Paint Coverage Calculator

2 gallons
Paintable area310 sq ft
Paint needed (exact)1.77 gallons
Or in quarts8 quarts

Coverage of 350 sq ft per gallon is typical for interior latex paint on smooth, previously painted walls. Rough, porous, or unprimed surfaces can drop coverage to 250 sq ft per gallon or less.

Formulas:

Paintable area = 2 × (Length + Width) × Height − Doors and windows

Gallons = Paintable area × Coats ÷ Coverage per gallon, rounded up to whole gallons

Quarts = Gallons × 4, rounded up

What This Paint Calculator Does

Paint is one of the easiest home projects to misjudge. Buy too little and you are back at the store mid-job, hoping the second can matches the first. Buy too much and you have expensive cans sitting in the garage for years. This calculator takes the guesswork out: enter the room size, the doors and windows, the number of coats, and the coverage printed on the can, and it tells you how many gallons — and quarts — to buy.

The calculation is straightforward, but the details matter. The wall area of a room is the perimeter times the height: a 12 by 10 foot room with 8-foot ceilings has a perimeter of 44 feet and a wall area of 352 square feet. Doors and windows are then subtracted — a standard door is 21 square feet and a typical window is 12 square feet — because you do not paint glass or door slabs with wall paint. What is left is the paintable area, and dividing that by the coverage per gallon gives the paint needed for one coat.

How to Use the Calculator

Measure the room in feet: length, width, and ceiling height. Then add up the doors and windows. A standard interior door is 3 feet wide and 7 feet tall, so 21 square feet. A typical window is 3 by 4 feet, or 12 square feet. A room with two doors and two windows has 42 + 24 = 66 square feet of openings, though many people round to 15 square feet per door and 15 per window as a quick estimate — the calculator lets you enter the exact figure.

Choose the number of coats: two is the standard for a proper finish, and it is what the default assumes. One coat is only enough when you are repainting the same color on walls in good condition. Set the coverage per gallon from the label on your paint can — 350 square feet per gallon is typical for interior latex on smooth walls, but the number varies by brand and finish, so check the can.

How Much Paint Does a Gallon Cover?

The headline figure on most interior paint cans is 350 to 400 square feet per gallon, and that is realistic for smooth, previously painted drywall. But coverage drops fast on other surfaces. New, unprimed drywall can soak up paint at 250 square feet per gallon or less on the first coat, because the bare paper face and joint compound are very absorbent. Textured walls, plaster, and brick are worse still — a rough surface can halve the coverage.

The finish matters too. Flat paint covers slightly better than gloss, because it is thicker and hides more. Dark colors over light walls — or light over dark — need an extra coat to hide the old color, which effectively doubles the paint for that wall. And the application method makes a difference: a roller lays paint on thicker than a sprayer, and a sprayer loses 10 to 20% of the paint as overspray. When in doubt, use the lower end of the coverage range on the can rather than the upper end.

Worked Example: A 12 × 10 Bedroom

Take a bedroom 12 feet long, 10 feet wide, with 8-foot ceilings, two doors (42 square feet of openings), two coats of paint, and coverage of 350 square feet per gallon. The perimeter is 2 × (12 + 10) = 44 feet, and the wall area is 44 × 8 = 352 square feet. Subtracting the doors leaves 352 − 42 = 310 square feet of paintable wall. Two coats means 310 × 2 = 620 square feet of coverage needed, and at 350 square feet per gallon that is 620 ÷ 350 = 1.77 gallons. Paint is sold in whole gallons, so you buy 2 gallons — or 8 quarts, if you prefer smaller cans.

For a bigger room, a 20 by 15 foot living room with 9-foot ceilings and 60 square feet of openings has a perimeter of 70 feet and a wall area of 630 square feet. After openings, 570 square feet remain. One coat at 400 square feet per gallon needs 570 ÷ 400 = 1.43 gallons, so you buy 2 gallons (6 quarts). Two coats would need 2.85 gallons, so you would buy 3 gallons. Notice how the ceiling height matters: going from 8-foot to 9-foot ceilings adds an eighth to the wall area.

Do You Need Primer?

Primer is a separate coat that seals the surface so the topcoat adheres evenly and covers in fewer coats. You need it on new drywall, on bare wood, on patched areas, and when you are making a big color change — especially going from dark to light. You can usually skip it when repainting a wall in good condition with a similar color.

Primer covers about the same area per gallon as paint — roughly 300 to 400 square feet — so you can use this calculator for primer too by entering 1 coat. A 310 square foot room needs about 1 gallon of primer. Self-priming paints, often labelled "paint and primer in one," contain extra resin and can work on previously painted walls, but they are not a substitute for real primer on bare drywall or raw wood. If you are priming new drywall, use a dedicated drywall primer and budget for the extra gallon.

Tips for Buying Paint

Buy all the paint at once. Paint color varies slightly between batches, just like brick. If you buy a second can later, it may be a visibly different shade. Buy the full quantity in one trip, and mix the cans together in a 5-gallon bucket — painters call this "boxing" — so the color is uniform across the room.

Keep a little left over. A quart of leftover paint is worth its weight in gold for touch-ups. Label the can with the room, the color name and code, the finish, and the date, and store it in a cool, dry place. Paint stored properly lasts for years; paint stored in a freezing garage does not.

Do not forget the ceiling and trim. This calculator covers the walls only. A ceiling needs ceiling paint — usually flat white — at roughly the floor area of the room: a 12 by 10 room has a 120 square foot ceiling, which needs about half a gallon for one coat. Trim and doors need a separate semi-gloss paint, and a quart usually covers the trim in an average room.

Check the return policy. Many paint stores accept returns of unopened cans. That makes it safe to round up to the next whole gallon rather than trying to shave the quantity to the exact figure.

Common Mistakes to Avoid

The biggest mistake is forgetting the second coat. A single coat of paint over a different color almost always shows through — the old color ghosts through the new paint, especially at edges and in raking light. Budget for two coats unless you are repainting the exact same color on walls in good condition.

The second mistake is using the coverage figure from the can without adjusting for the surface. The number on the label is measured on a smooth test panel, not on your walls. On new drywall, knock 25% off the coverage for the first coat. On textured walls, knock off more.

The third mistake is painting in the wrong order and wasting paint on rework. The standard order is ceiling first, then walls, then trim — so drips from the ceiling land on unpainted walls, and drips from the walls land on unpainted trim. Work top to bottom, and cut in the edges with a brush before rolling the large areas.

Advertisement

Frequently Asked Questions

How many gallons of paint do I need for a 12x12 room?

About 2 gallons for two coats. A 12x12 room with 8-foot ceilings has 384 square feet of wall; after subtracting about 42 square feet for two doors, 342 square feet remain, and two coats at 350 sq ft per gallon need 1.95 gallons, rounded up to 2.

How much area does one gallon of paint cover?

About 350 to 400 square feet per gallon on smooth, previously painted walls. On new, unprimed drywall coverage can drop to 250 square feet per gallon, and rough or textured surfaces cover even less.

How many coats of paint should I apply?

Two coats is standard for a proper finish. One coat is only enough when repainting the same color on walls in good condition. A big color change, especially dark to light, may need a primer coat plus two topcoats.

Do I subtract doors and windows when calculating paint?

Yes. A standard door is 21 square feet (3x7 ft) and a typical window is 12 square feet (3x4 ft). Subtracting them avoids overbuying, though many painters skip small windows since the waste roughly cancels out.

How much paint do I need for a ceiling?

About half a gallon per coat for a 12x10 room. The ceiling area equals the floor area (120 sq ft here), and at 350 sq ft per gallon one coat needs 0.34 gallons, so one gallon covers two coats with paint to spare.