Lumber / Board Foot Calculator
Work out how many board feet are in a piece of lumber — and what a whole order costs — from the thickness, width, length, and quantity.
Lumber / Board Foot Calculator
One board foot = 144 cubic inches (a board 1 inch thick, 12 inches wide, 1 foot long). Use nominal sizes (a "2x6") unless your supplier prices by actual size.
Formulas:
Board feet (one piece) = Thickness (in) × Width (in) × Length (ft) ÷ 12
Total board feet = Board feet per piece × Quantity
Volume (cu ft) = Total board feet ÷ 12 | Cost = Total board feet × Price per board foot
What Is a Board Foot?
A board foot is the standard unit for buying and selling lumber in the United States. One board foot is 144 cubic inches of wood — the volume of a board 1 inch thick, 12 inches wide, and 1 foot long. It is a volume measure, not an area measure: a board foot of 2-inch-thick lumber is half the surface area of a board foot of 1-inch lumber, because the thickness counts. Lumberyards price hardwood by the board foot, and softwood framing lumber is often priced by the piece but still measured in board feet for ordering and estimating.
The board foot exists because lumber comes in so many sizes. A 1x12, a 2x6, and a 4x3 are all different shapes, but if each one is 8 feet long, the 1x12 and the 2x6 are both 8 board feet, and the 4x3 is also 8 board feet. Pricing by volume lets a yard charge fairly for any size, and it lets you compare the cost of different sizes on equal terms.
How to Use This Calculator
Enter the thickness and width in inches and the length in feet — the way lumber is sold (a "2x6, 8 feet long"). Then enter how many pieces you need. If you know the price per board foot, enter it and the calculator will give you the total cost of the order. The results update as you type, so you can compare sizes quickly: try a 2x8 against a 2x6 and see exactly how much extra wood — and money — the wider board costs.
The headline result is total board feet for the whole order. The per-piece figure is useful when you are checking a quote: if a yard quotes a price per piece, divide it by the board feet per piece to get the price per board foot, and compare that against other yards. The cubic-foot figure is there for anyone who needs the volume in standard units — for example, to estimate the weight of the load or the space it takes in a truck.
The Board Foot Formula
The formula is simple: board feet = thickness in inches times width in inches times length in feet, divided by 12. The division by 12 converts the length from feet to inches so that all three dimensions are in inches, and then 144 cubic inches (12 × 12) is one board foot. A 2x6 that is 8 feet long is 2 × 6 × 8 ÷ 12 = 8 board feet. A 1x12 that is 10 feet long is 1 × 12 × 10 ÷ 12 = 10 board feet. A 4x4 post, 8 feet long, is 4 × 4 × 8 ÷ 12 = 10.67 board feet.
To get the total for an order, multiply the per-piece figure by the quantity. Ten 2x6 boards, 8 feet long, are 80 board feet. At $2.50 per board foot, that order costs $200. And to convert board feet to cubic feet, divide by 12 — because one board foot is 1/12 of a cubic foot (144 cubic inches out of 1,728). Eighty board feet is 6.67 cubic feet.
Nominal Size vs Actual Size
Lumber is sold by its nominal size — the size it was when it was rough-sawn — but the board you take home is smaller, because it has been surfaced (planed smooth) on all four sides. A 2x4 is actually 1.5 inches by 3.5 inches. A 2x6 is actually 1.5 by 5.5 inches. A 1x12 is actually 0.75 by 11.25 inches. The difference is the wood removed by planing, plus shrinkage as the lumber dries.
This matters for board feet because hardwood is usually priced by its actual size — the size you measure — while softwood framing lumber is priced by its nominal size. If you are buying hardwood from a yard that prices by the board foot, measure the actual thickness and width and use those numbers. If you are estimating framing lumber, use the nominal sizes (2, 4, 6, 8) because that is how it is priced and sold. Mixing the two up is the most common board-foot mistake: a nominal 2x6 has 8 board feet in an 8-foot length, but the actual 1.5-by-5.5-inch board has only 5.5 board feet — a 31% difference.
Worked Example
Say you are building a workbench top from five 1x12 boards, 10 feet long, at $2.50 per board foot. Each board is 1 × 12 × 10 ÷ 12 = 10 board feet. Five boards are 50 board feet, which is 50 ÷ 12 = 4.17 cubic feet of wood. At $2.50 per board foot, the order costs 50 × $2.50 = $125.
For a framing example: twenty 4x4 posts, 8 feet long, at $1.20 per board foot. Each post is 4 × 4 × 8 ÷ 12 = 10.67 board feet. Twenty posts are 213.33 board feet, which is 17.78 cubic feet, and the cost is 213.33 × $1.20 = $256. If those posts were priced by the piece instead, you could check the quote by dividing the piece price by 10.67 board feet to get the price per board foot.
Tips for Buying Lumber
Buy a little extra. Lumber is a natural material: boards warp, split, and have knots. Order 10% more than the project needs so you can reject the worst boards and still finish the job. For hardwood, where you pick through the pile, buy the boards you need plus one spare of each size.
Check the grade. Framing lumber is graded (No. 2 is the standard for most construction), and hardwood is graded by the amount of clear, defect-free wood in each board (FAS is the top grade, then Select, then No. 1 Common). A lower grade costs less per board foot but wastes more of each board on knots and defects — for a project with small parts, the cheaper grade is often the better buy.
Compare by the board foot, not by the piece. Two yards can quote the same board at different piece prices, and the cheaper piece may be a shorter board or a lower grade. The price per board foot is the only fair comparison, and this calculator gives you the board feet per piece to work it out.
Let it acclimate. Wood moves with humidity. Bring lumber indoors a few days before you build with it, especially for interior projects, so it settles to the moisture level of the room. Building with wet lumber guarantees gaps and warping as it dries.
Common Mistakes to Avoid
The biggest mistake is mixing up nominal and actual sizes, as described above — it can throw the board-foot count off by 30% or more. The second mistake is forgetting the division by 12: thickness times width times length without dividing gives a number 12 times too large. If the answer looks wildly wrong, check the formula first.
The third mistake is entering the length in inches instead of feet. A 96-inch board is 8 feet long; entering 96 as the length gives 12 times too many board feet. Always enter length in feet, and thickness and width in inches. Finally, remember that board feet measure volume, not usable wood: a board with a big knot or a split end still counts as full board feet, which is why buying extra and picking through the pile matters.
Results from this calculator are estimates for planning and ordering. Your lumberyard can confirm the pricing basis — nominal or actual size — for the species and grade you are buying.
Frequently Asked Questions
How many board feet are in a 2x6 that is 8 feet long?
8 board feet. The formula is thickness x width x length / 12, so 2 x 6 x 8 / 12 = 8 board feet.
What is one board foot equal to?
144 cubic inches — a board 1 inch thick, 12 inches wide, and 1 foot long. One board foot is 1/12 of a cubic foot.
How do I calculate board feet for multiple boards?
Work out the board feet for one piece (thickness in inches x width in inches x length in feet / 12), then multiply by the number of pieces. Ten 2x6 boards, 8 feet long, are 80 board feet.
Should I use nominal or actual size for board feet?
Use nominal size for softwood framing lumber (a 2x6 counts as 2 by 6) and actual measured size for hardwood priced by the board foot. A nominal 2x6 is actually 1.5 by 5.5 inches, which is 5.5 board feet per 8-foot length instead of 8.
How many board feet are in a 4x4 post 8 feet long?
10.67 board feet. The formula gives 4 x 4 x 8 / 12 = 10.67 board feet per post, so twenty posts are 213.33 board feet.