MOV to MP4 Converter
Convert Apple QuickTime .mov videos to MP4 — the format that plays on every phone, computer, and TV — free, in your browser.
MOV to MP4 Converter
Drop a MOV file here or click to choose one
No file chosen yet. Maximum file size 2 GB.
Your video never leaves your device — conversion runs entirely in your browser. The first conversion loads the converter (about 30 MB); later conversions start right away.
Command used:
ffmpeg −i input.mov −c:v libx264 −c:a aac −movflags +faststart output.mp4
Video is encoded with H.264 (libx264) at its default quality (CRF 23); audio is encoded as AAC; faststart moves the index to the front so playback can begin before the whole file downloads.
What Does a MOV to MP4 Converter Do?
A MOV to MP4 converter takes a video in Apple's QuickTime format (.mov) and saves it as an MP4 file. The video itself — the same pictures, the same sound, the same length — is re-encoded into the MP4 container with H.264 video and AAC audio, the combination that plays on practically every device made in the last fifteen years.
MOV and MP4 are closely related: the MP4 format was derived from Apple's QuickTime file format, so they share much of their structure. The difference is compatibility. MOV files play beautifully on Apple devices and in QuickTime Player, but they cause problems on Windows computers, Android phones, many web browsers, and plenty of video editing and sharing services. MP4 has no such problems. Converting is simply the act of moving the same video into the format the rest of the world expects.
How to Use This Converter
Drop a .mov file onto the upload area or click it to choose one from your device. There are no settings to choose: the output is always an MP4 with H.264 video, AAC audio, and faststart enabled, which is the most compatible combination there is. Press Convert to MP4, wait for the progress to reach 100 percent, and download the result. The MP4 keeps the original file name with an .mp4 extension, so clip.mov becomes clip.mp4.
The first conversion in a session loads the converter (about 30 MB); later conversions start right away. Conversion speed depends on your device and the length of the video: a short phone clip usually takes under a minute, while a long 4K recording takes considerably longer, because every frame is decoded and re-encoded. The status line shows progress as a percentage while it works.
How the Conversion Works
This converter runs entirely in your browser using ffmpeg.wasm, a version of the ffmpeg media toolkit compiled to WebAssembly so it can run inside a web page. When you press Convert, your MOV file is loaded into the browser's memory, ffmpeg decodes the video and audio, re-encodes them as H.264 and AAC, writes them into an MP4 container with the faststart flag, and hands the result back as a download. Your file is never uploaded to a server, so there is no upload wait and no copy of your video on anyone else's computer.
The video is re-encoded rather than simply repackaged. Repackaging — copying the video and audio streams into an MP4 without re-encoding — would be faster, but it would fail whenever the MOV contains a codec that MP4 players do not expect, such as ProRes or an unusual audio format. Re-encoding with H.264 and AAC guarantees the result plays everywhere, at the cost of conversion time and a very small quality loss. The encoder uses H.264's default quality (CRF 23), which is widely considered visually near-lossless for most content, so the loss is not something you will notice in normal viewing.
Why MOV Files Cause Problems
MOV is Apple's container format, introduced with QuickTime in the early 1990s. On a Mac or iPhone, MOV files just work. Anywhere else, they are a gamble. Many Windows programs refuse to open them without extra codecs. Android phones often play them, but not always, and sometimes without sound. Web browsers are inconsistent: some play MOV files, some offer to download them instead, and some show nothing at all. Upload forms, learning platforms, and video editors frequently reject .mov files outright, with an error message that just says the format is unsupported.
The problem is not the video inside — most MOV files already contain H.264 video, the same codec MP4 uses. The problem is the container and the assumptions software makes about it. An MP4 file signals to every player, browser, and service that it contains standard H.264 video and AAC audio, and everything accepts it without a second thought. Converting removes the friction: the same video, in the format nobody argues with.
What Is Faststart, and Why Does It Matter?
MP4 files carry an index, called the moov atom, that tells the player where each part of the video lives inside the file. By default, ffmpeg writes this index at the end of the file, after all the video data — which means a player streaming the file over the internet must download the whole file before it can start playing. The faststart flag moves the index to the front of the file, so playback can begin as soon as the first chunk arrives.
That matters whenever the MP4 will be watched online: on a website, in a shared link, or in a messaging app preview. A faststart MP4 starts playing immediately; a non-faststart MP4 makes the viewer wait for the full download. It costs nothing — the file is the same size, and the conversion takes no longer — so this tool enables it on every conversion. It is one of those details that separates a properly made MP4 from a hasty one.
Worked Example
Take a video called clip.mov, a two-minute iPhone recording in 1080p. The tool names the output clip.mp4 and re-encodes it with H.264 at the default quality and AAC audio, with faststart enabled. If the original MOV is about 250 MB, the MP4 typically comes out a little smaller — roughly 200 to 240 MB — because the re-encode at CRF 23 is usually slightly more efficient than the camera's real-time encoding. The exact size depends on the footage: a still shot compresses more than a moving one.
The important numbers are the ones that do not change: the video is still two minutes long, still 1080p, still the same pictures and sound. Only the container and the encoding have changed. And the practical result is immediate — the MP4 plays in a Windows browser, uploads to a learning platform, attaches to an email, and opens in a video editor, all of which the MOV may have refused to do.
iPhone Videos and HEVC
Modern iPhones record video in .mov files, and depending on the camera settings, the video inside may be H.264 or HEVC (also called H.265, the "high efficiency" format). HEVC files are smaller for the same quality, but they are even less compatible than H.264 MOV files — many Windows computers and older devices cannot play them at all.
This converter handles both. HEVC input is decoded and re-encoded as H.264, so the output MP4 plays everywhere regardless of what the iPhone recorded. The one cost is time: decoding HEVC is heavier work than decoding H.264, so a 4K HEVC recording takes longer to convert than the same clip in H.264. If you record a lot of video for sharing, switching the iPhone camera to "Most Compatible" (H.264) avoids the problem at the source — but for the MOV files you already have, conversion is the fix.
Privacy and Limits
Your video is processed entirely in your browser and never uploaded to any server. That is not a privacy promise — it is how the tool is built. There is no upload step, no account, and no server-side processing, so personal videos, family footage, and work recordings stay on your own device.
The limits are practical ones. Files must be under 2 GB, a limit of the WebAssembly runtime that runs the converter. Very long or 4K videos take a while and use a lot of memory; if a conversion fails on a huge file, try the Video Compressor instead, which can shrink the file and convert it to MP4 in one step. The tool works in current versions of Chrome, Edge, Firefox, and Safari on desktop and mobile, and the first use in a session downloads about 30 MB of converter code.
Tips for Better Results
Keep the original MOV. The MP4 is a re-encoded copy, and re-encoding always loses a tiny amount of quality. Keep the MOV as the master copy so you can make a different version later without stacking losses.
Convert before uploading, not after a rejection. If a platform, editor, or form says it accepts MP4, convert first and upload the MP4. It saves a failed upload and a confusing error message.
Check the result plays where you need it. The MP4 this tool makes is about as compatible as a video file can be, but if your destination is unusual — an old DVD player, a specific piece of hardware — test with a short clip first.
Close other heavy tabs for long videos. Video encoding is demanding work. Fewer competing tabs means a faster conversion, especially on a laptop or phone.
Common Mistakes to Avoid
The most common mistake is renaming the file instead of converting it. Changing clip.mov to clip.mp4 by renaming does not change the contents — it just lies about the format, and most players will either refuse the file or play it with glitches. The container must actually be converted, which is what this tool does.
The second mistake is converting the same video twice. Every re-encode loses a little quality, and the losses add up. Convert once, from the original MOV, and keep the result. If you need a smaller file as well, use the Video Compressor on the original MOV rather than compressing the already-converted MP4.
Finally, do not expect conversion to shrink the file much. This tool's job is compatibility, not size: the MP4 is usually close to the MOV in size, sometimes a little smaller, sometimes a little larger. If the file is too big to send, compression — not conversion — is the answer.
Frequently Asked Questions
Will converting MOV to MP4 lose quality?
Almost none that you can see. The video is re-encoded with H.264 at its default quality (CRF 23), which is widely considered visually near-lossless. A tiny amount of detail is lost in any re-encode, which is why you should keep the original MOV as your master copy.
Why can't I just rename the file from .mov to .mp4?
Renaming only changes the label, not the contents — the file is still a QuickTime container, and most players will refuse it or play it with glitches. Real conversion rewrites the video and audio into a proper MP4 container.
Does this work with iPhone videos?
Yes. iPhone .mov files work whether they were recorded in H.264 or HEVC (high efficiency) mode. HEVC recordings take a little longer to convert because decoding them is heavier work.
What does faststart do?
Faststart moves the file's index (the moov atom) to the front of the MP4, so a player can start playback before the whole file has downloaded. Without it, someone streaming your video online has to wait for the full download first.
Is my video uploaded to a server?
No. Conversion runs entirely in your browser using ffmpeg.wasm, and your file never leaves your device. The 2 GB size limit comes from the WebAssembly runtime, not from any server rule.