MP3 Cutter
Trim an MP3 or other audio file to exactly the section you want — by start and end time, with no re-encoding and no quality loss.
MP3 Cutter
Drop an audio file here or click to choose one
No file chosen yet. Maximum file size 2 GB.
Cutting copies the audio without re-encoding, so the trimmed file sounds exactly like the original. Your file never leaves your device. The first cut loads the converter (about 30 MB).
Command used:
ffmpeg −i input.mp3 −ss 30 −to 90 −c copy output.mp3
Trimmed length = End time − Start time (90 − 30 = 60 seconds)
Time formats: seconds (90), minutes and seconds (1:30), or hours, minutes, and seconds (1:02:30)
What Does an MP3 Cutter Do?
An MP3 cutter trims an audio file down to the section you want. You give it a start time and an end time, and it produces a new file containing only that slice — the chorus of a song, the best minute of an interview, the part of a voice memo that actually matters, or a recording with the long silence at the beginning removed.
The important detail is how it cuts. This tool copies the audio stream without re-encoding it, which means the trimmed file is bit-for-bit the same audio as that section of the original. There is no quality loss at all, and the cut is fast, because the computer is copying data rather than decoding and re-encoding it. The output keeps the original format, so an MP3 stays an MP3, a WAV stays a WAV, and the file name gets "-trimmed" added to it.
How to Use This Cutter
Drop an audio file onto the upload area or click it to choose one from your device. The tool accepts MP3, WAV, M4A, OGG, FLAC, AAC, and Opus files. Enter the start time and the end time of the section you want to keep. Times can be plain seconds (90), minutes and seconds (1:30), or hours, minutes, and seconds (1:02:30) for long recordings. Press Cut Audio and download the result.
The first cut in a session loads the converter (about 30 MB); after that, cuts start immediately. Cutting itself is very fast — usually a few seconds even for a long file — because no re-encoding is involved. The trimmed length is shown above the download button, so you can check it before downloading: a cut from 0:30 to 1:30 is 60 seconds long.
How Cutting Without Re-Encoding Works
Audio files are made of small frames, each holding a fraction of a second of sound — an MP3 frame holds about 26 milliseconds. When this tool cuts, it finds the frames between your start and end times and copies them into a new file, untouched. Because the frames themselves are never decoded and re-encoded, the audio quality is exactly the same as the original, and the process takes seconds rather than minutes.
There is one consequence of frame-based cutting: the cut lands on a frame boundary, not on the exact millisecond you asked for. In practice this means the start and end of your trimmed file may be off by up to about 26 milliseconds — roughly a fortieth of a second — which is far too small for anyone to notice. If you need sample-perfect cuts for professional editing, use an audio editor; for everything else, frame-accurate cutting is exactly right.
Worked Example
Take a song called song.mp3 that is four minutes long, and suppose you want the chorus, which runs from 0:30 to 1:30. Enter 0:30 as the start time and 1:30 as the end time. The tool converts those to seconds — 30 and 90 — and the trimmed length is 90 minus 30, which is 60 seconds. The output is named song-trimmed.mp3 and contains exactly that minute of the song.
A second example with a WAV file: track.wav, cut from 10 seconds to 45 seconds, gives a 35-second file named track-trimmed.wav. And a long recording works the same way: talk.m4a cut from 1:02:30 to 1:05:00 means start 3,750 seconds and end 3,900 seconds, a trimmed length of 150 seconds, or two and a half minutes. The arithmetic is the same in every case — end minus start — and the tool shows the result before you cut, so a typo is easy to catch.
When to Cut Audio
The most common use is removing the parts you do not want. Voice memos often start with a few seconds of fumbling and end with a long silence; a quick trim turns a rambling recording into a clean clip. Podcasters cut intros, outros, and mistakes out of raw recordings. Interviewers pull out the one answer worth sharing. Teachers cut a long lecture down to the five minutes their students need to hear.
Cutting is also how ringtones and notification sounds are made: a 30-second slice of a song is the classic ringtone length, and a trimmed file at the original quality sounds far better than a re-recorded one. The same applies to sound clips for videos, presentations, and messages — a short, clean excerpt lands better than a whole file with a note saying "skip to 2:14".
One use worth mentioning is file size. A trimmed file is proportionally smaller than the original: cutting a four-minute MP3 down to one minute leaves a file about a quarter of the size. If a recording is too big to send, cutting out the unnecessary parts is often a better answer than compressing it.
Time Formats, Explained
The tool accepts three ways of writing a time, and they all mean the same thing. Plain seconds — 90 — is the simplest for short clips. Minutes and seconds — 1:30 — is the most natural for most people, and it is how media players show the position. Hours, minutes, and seconds — 1:02:30 — is for long recordings such as lectures, sermons, and audiobooks, where the interesting part might be over an hour in.
Whichever format you use, the tool converts it to seconds before cutting: 1:30 becomes 90, and 1:02:30 becomes 3,750 (one hour is 3,600 seconds, plus two minutes is 120, plus 30). The end time must be after the start time, and both must be valid times — the tool will tell you if a time does not make sense. If the end time is past the end of the file, the cut simply runs to the end of the file, so you can safely enter a generous end time when you are not sure exactly where the recording stops.
Privacy and Limits
Your audio is processed entirely in your browser and never uploaded to any server. That is not a privacy promise — it is how the tool is built. There is no upload step, no account, and no server-side processing, so voice memos, interviews, and private recordings stay on your own device.
The limits are practical ones. Files must be under 2 GB, a limit of the WebAssembly runtime that runs the converter — for audio, that is generous: 2 GB holds about three hours of uncompressed CD-quality WAV, or well over a day of MP3 audio. The first cut in a session downloads about 30 MB of converter code, so the first run needs an internet connection. The tool works in current versions of Chrome, Edge, Firefox, and Safari on desktop and mobile.
Tips for Better Results
Find the times first. Play the file in your media player and note the exact times where the section starts and ends. Most players show the position as you listen, so you can write down 0:30 and 1:30 before you ever open the cutter.
Leave a little room. It is better to start a second early and end a second late than to clip the first word or the last note. You can always trim again from the original if the result has too much room — but you cannot recover audio you cut off.
Keep the original. The trimmed file is a copy, not a replacement. Keep the full recording so you can cut a different section later, or re-cut with better times, without losing anything.
Cut before converting. If you need the clip in a different format, cut first and then use the Audio Converter on the short file — it is faster, and you only convert the audio you actually want. If you need several clips joined together, the Audio Joiner merges them into one file.
Common Mistakes to Avoid
The most common mistake is mixing up the time format — entering 1.30 meaning one minute thirty, when the tool reads a plain number as seconds. Use a colon for minutes and seconds (1:30), or just use seconds (90). The tool shows the trimmed length before you cut, so a wrong format is easy to spot: if you expected a minute and the tool says the cut is one second long, the time was misread.
The second mistake is cutting from an already-trimmed file. Each cut is lossless, so cutting a cut does not lose quality — but it does make the times confusing, because the positions in the trimmed file do not match the positions in the original. Always cut from the original file, where the times you noted still apply.
Finally, do not expect cutting to fix a bad recording. Trimming removes unwanted sections; it does not remove background noise, fix volume problems, or improve sound quality. Those are editing jobs for an audio editor. What cutting does — quickly and without any quality loss — is give you exactly the section you want, and nothing else.
Frequently Asked Questions
Does cutting an MP3 reduce its quality?
No. This cutter copies the audio stream without re-encoding it, so the trimmed file is bit-for-bit the same audio as that section of the original. The only limit is that cuts land on frame boundaries, within about 26 milliseconds of the time you asked for.
What time formats can I use?
Plain seconds (90), minutes and seconds (1:30), or hours, minutes, and seconds (1:02:30). They all mean the same thing — 1:30 and 90 are both 90 seconds — so use whichever is easiest.
What happens if the end time is past the end of the file?
The cut simply runs to the end of the file. You can safely enter a generous end time when you are not sure exactly where the recording stops.
Can I cut a WAV or M4A file, or only MP3?
You can cut MP3, WAV, M4A, OGG, FLAC, AAC, and Opus files. The output keeps the original format, so a WAV stays a WAV and an M4A stays an M4A.
Is my audio uploaded anywhere?
No. Cutting runs entirely in your browser using ffmpeg.wasm, and your file never leaves your device. The 2 GB size limit comes from the WebAssembly runtime, not from any server rule.