Roof Pitch Calculator
Convert a roof's rise and run into its pitch (x/12), angle in degrees, slope percentage, and the multiplier for working out roof area.
Roof Pitch Calculator
Pitch is rise over a 12-inch run. The area multiplier converts a flat (plan) roof area to the actual sloped roof surface: multiply the footprint by the multiplier.
Formulas:
Pitch (per 12) = Rise ÷ Run × 12
Angle = atan(Rise ÷ Run), in degrees
Slope (%) = Rise ÷ Run × 100
Roof area multiplier = √(1 + (Rise ÷ Run)²)
What Is Roof Pitch?
Roof pitch is the steepness of a roof, expressed as the rise over a 12-inch run. A roof that rises 6 inches for every 12 inches of horizontal run has a 6/12 pitch — spoken as "six twelve." Pitch is the standard way roofers, builders, and building codes describe how steep a roof is, and it decides which roofing materials can be used, how much roofing material the job needs, and how the roof sheds water and snow.
Pitch is not the same as the roof angle, though the two are related: the angle is the arctangent of the rise over the run, so a 6/12 pitch is a 26.57-degree angle, and a 12/12 pitch is a 45-degree angle. Pitch is also not the same as slope percentage, which is the rise over the run times 100 — a 6/12 pitch is a 50% slope. This calculator converts between all three, so whichever number you have, you can get the others.
How to Use This Calculator
Enter the rise and the run in inches. The rise is the vertical distance the roof climbs; the run is the horizontal distance it covers while climbing. The most common way to measure a roof is to hold a level horizontally out from the roof surface, measure 12 inches along the level, and then measure straight down from the end of the level to the roof surface — that vertical distance is the rise for a 12-inch run, which is the pitch directly. Enter that rise with a run of 12.
The headline result is the pitch in x/12 form. Below it are the angle in degrees, the slope as a percentage, the roof area multiplier, and the rafter length per foot of run. The area multiplier is the number to use when ordering roofing material: multiply the flat footprint of the roof by the multiplier to get the actual sloped surface area. The rafter length per foot of run is the length of rafter needed for each foot of horizontal run — multiply it by the total run to get the rafter length (or use the Rafter Length Calculator for the full calculation).
The Roof Pitch Formulas
Pitch is rise divided by run, scaled to a 12-inch run: pitch per 12 = (rise ÷ run) × 12. A roof that rises 6 inches over a 12-inch run is 6 ÷ 12 × 12 = 6/12. A roof that rises 4 inches over a 12-inch run is 4/12. If you measure a rise of 8 inches over a 24-inch run, the pitch is 8 ÷ 24 × 12 = 4/12 — the same pitch, measured over a longer distance.
The angle comes from trigonometry: angle = atan(rise ÷ run). For a 6/12 pitch, atan(6 ÷ 12) = atan(0.5) = 26.57 degrees. For a 4/12 pitch, atan(4 ÷ 12) = atan(0.3333) = 18.43 degrees. For a 12/12 pitch, atan(1) = 45 degrees. The slope percentage is simpler: rise ÷ run × 100, so 6/12 is 50% and 4/12 is 33.33%.
The roof area multiplier is the square root of 1 plus the slope squared: multiplier = √(1 + (rise ÷ run)²). For a 6/12 pitch, that is √(1 + 0.25) = √1.25 = 1.118. For a 4/12 pitch, it is √(1 + 0.1111) = √1.1111 = 1.054. The multiplier is the ratio of the sloped roof surface to the flat footprint: a 6/12 roof has 11.8% more surface area than its footprint, and a 12/12 roof has 41.4% more. That is why ordering roofing material from the footprint alone always comes up short.
Common Roof Pitches
Low-slope roofs (2/12 to 4/12) are common on modern homes, extensions, and commercial buildings. They need special roofing materials — standard asphalt shingles are not recommended below 2/12, and below 4/12 they need extra underlayment — because water drains slowly and can back up under the shingles. A 2/12 roof has an angle of only 9.46 degrees, and it looks almost flat from the ground.
Medium pitches (4/12 to 9/12) cover most residential roofs. A 4/12 pitch (18.43 degrees) is the most common minimum for asphalt shingles without special underlayment. A 6/12 pitch (26.57 degrees) is the classic suburban roof — steep enough to shed water and snow well, but shallow enough to walk on safely. An 8/12 pitch (33.69 degrees) is steep enough that roofers need safety equipment, and it starts to look dramatic from the street.
Steep roofs (10/12 and above) are common in snowy climates, where a steep pitch sheds snow before it can build up, and on historic and craftsman-style homes. A 12/12 pitch is a 45-degree angle — a roof that steep cannot be walked on at all, and all work must be done from scaffolding or a lift. Steep roofs use far more material per square foot of footprint: at 12/12, the multiplier is 1.414, so a 1,000-square-foot footprint needs 1,414 square feet of roofing.
Worked Example
Say you measure a roof and find it rises 6 inches over a 12-inch run. The pitch is 6/12. The angle is atan(6 ÷ 12) = atan(0.5) = 26.57 degrees. The slope is 6 ÷ 12 × 100 = 50%. The area multiplier is √(1 + 0.5²) = √1.25 = 1.118. And the rafter length per foot of run is 1.118 × 12 = 13.42 inches.
Now use the multiplier to order shingles. If the house footprint is 30 feet by 40 feet, the flat roof area is 1,200 square feet. Multiply by 1.118 and the actual sloped surface is 1,341.6 square feet. Roofing is sold by the square (100 square feet), so that is 13.42 squares — round up to 14 squares, plus waste. Without the multiplier, you would have ordered 12 squares and come up nearly 2 squares short.
Tips for Measuring Roof Pitch
Measure from inside if you can. The safest way to measure pitch is from inside the attic: hold a level against the underside of a rafter, mark 12 inches along the level, and measure vertically from the mark to the rafter. You get the same rise and run without climbing onto the roof.
Measure in more than one place. Roofs are not always uniform: additions, dormers, and repairs can change the pitch on different sections. Measure each section separately, and calculate the material for each one.
Do not walk a steep roof. Anything above 6/12 is slippery when wet or dusty, and above 8/12 it is dangerous even when dry. Measure from the ground with a long level, from the attic, or hire a roofer to measure it. A fall from a roof is not worth saving a measurement fee.
Check the minimum pitch for your material. Asphalt shingles need at least 2/12 (with special underlayment below 4/12). Metal roofing can go as low as 1/12 with the right profile and sealing. Clay and concrete tiles generally need 3/12 or 4/12 minimum. Below the minimum, water backs up under the material and leaks — no amount of sealant fixes a pitch that is too low for the material.
Common Mistakes to Avoid
The biggest mistake is confusing pitch with angle: a 6/12 pitch is a 26.57-degree angle, not a 6-degree angle. The second mistake is ordering roofing material from the footprint area without the multiplier — on a 6/12 roof, that understates the material by nearly 12%, and on a 12/12 roof by 41%.
The third mistake is measuring the run along the slope instead of horizontally. The run is the horizontal distance, measured with a level — not the distance along the rafter. Measuring along the slope gives a longer run and a lower pitch than the roof actually has. The fourth is assuming the whole roof is one pitch: additions and dormers often have different pitches, and each section needs its own calculation. Finally, remember that the pitch decides the material: putting standard shingles on a 2/12 roof without the required underlayment is a leak waiting to happen.
Results from this calculator are estimates for planning and ordering. Confirm the pitch and the material requirements with a roofer before ordering, especially on steep or low-slope roofs.
Frequently Asked Questions
What is a 6/12 roof pitch in degrees?
26.57 degrees. The angle is atan(rise / run), so atan(6 / 12) = atan(0.5) = 26.57 degrees. A 6/12 pitch is also a 50% slope.
How do I measure roof pitch?
Hold a level horizontally out from the roof surface, measure 12 inches along the level, then measure straight down from the end of the level to the roof. That vertical distance in inches is the pitch (for example, 6 inches = 6/12). Measuring from inside the attic is safer.
What is the roof area multiplier for a 6/12 pitch?
1.118. The multiplier is sqrt(1 + (rise / run)^2), so for 6/12 it is sqrt(1.25) = 1.118. Multiply the flat footprint by 1.118 to get the actual sloped roof surface.
What is the minimum pitch for asphalt shingles?
2/12, with special underlayment required below 4/12. Below 2/12, water drains too slowly and can back up under the shingles, so a different roofing material is needed.
Is a 12/12 pitch a 45-degree angle?
Yes. A 12/12 pitch rises 12 inches over a 12-inch run, so atan(12 / 12) = atan(1) = 45 degrees. Its area multiplier is 1.414, meaning the roof surface is 41.4% larger than its footprint.